Grain & GrooveBoards & spoons, Asheville NC

A cutting board you’ll still be oiling twenty years from now.

End-grain and edge-grain boards, spoons and serving planks, glued up twelve at a time in Asheville, North Carolina from maple, walnut and cherry milled within 90 miles of the shop.

A large end-grain cutting board seen from above, a patchwork of maple, cherry and walnut blocks with growth rings and fine knife marks
The tag on this one
Batch
41, board 7 of 12
Wood
maple, cherry, walnut
Glue-ups
two, three days apart
Oil
four coats, four days
Signed
Ruth Hollis

Off the clamps this month

Each batch is twelve boards. When one sells out it stays sold out until the next glue-up dries, usually about three weeks.

Edge grain or end grain: what the extra $117 buys

Same maple, same size, same mill. The difference is which way the fibres face your knife.

Edge grain

Medium 16 × 11 in, $98

The knife
Cuts across long fibres. Fine for a German chef’s knife; a thin Japanese edge dulls a little faster.
Weight
5.6 lb, easy to carry to the sink twice a day.
Knife marks
Visible within months. Sand them out every few years, or call them character.
Oil
Every 28 days with daily use.

End grain

Medium 16 × 12 in, $215

The knife
Slips between fibres standing on end. The edge stays sharp noticeably longer, most of all on hard Japanese steel.
Weight
8.6 lb. Heavy enough that it tends to live on the counter.
Knife marks
Shallow cuts close back up. After a year it still looks close to new.
Oil
Weekly in the first month, then every 21 days.

If you mostly slice bread, cheese and the odd onion with a Western knife, buy edge grain and spend the difference on a good knife. Most of that $117 is four extra hours at the bench, and our journal has the arithmetic.

Six questions, one board, and sometimes the cheaper one

The picker asks how deep your counter is, how much of it you can clear, what you chop and how you wash up. It checks the board against your space before you pay for it, and when the answer is “not wood” it says that too.

25½-inch counter, 30 inches clear, vegetables for four most nights, a German chef’s knife.
End-grain large, 20 × 15 in13.4 lb, $295 in maple
The same kitchen, but the board goes to the sink after every meal.
Edge-grain large, 20 × 14 in8.9 lb, $138. Lifting 13.4 lb twice a day gets old.
Anything, with “it has to go in the dishwasher” ticked.
Don’t buy a wooden boardA polypropylene one will serve you better.

Eleven days from rough lumber to the box

That is an end-grain board. An edge-grain one skips the crosscut and the second glue-up, and is ready in eight.

  1. Days 1–2

    Rip and glue

    Rough maple ripped into strips, grain alternated, clamped overnight.

  2. Day 3

    Crosscut

    The panel is cut across the grain into rows.

  3. Day 4

    Turn and re-glue

    Each row turned on end, staggered into a checker.

  4. Day 5

    Flatten

    Slowest hour of the build.

  5. Days 6–9

    Oil, one coat a day

    Four coats of mineral oil, each left overnight to soak into the open ends of the fibres before the next goes on. Most shops do one.

  6. Days 10–11

    Butter, sign, box

    Board butter buffed in, the maker signs and dates the underside.

From people who use them

I emailed to order the large end-grain. Ruth asked how deep my counter was, then talked me down to the medium. It fits exactly between the stove and the sink, and I saved eighty dollars.
Dana M., Raleigh — end-grain maple, medium
Four years of daily onions on the walnut checkerboard. I sanded it once last spring and it looked new.
Priya S., Charlotte
A glue line opened after my roommate ran it through the dishwasher. They repaired it anyway and told me, kindly, not to let it happen twice.
Tom K., Portland

Come and lift one before you buy it

The workshop is in the River Arts District, two doors from the rail line. On open-shop Saturdays there is usually a glue-up in the clamps, and you can stand on the end-grain large to see that it doesn’t move.

How to find us

Thursday & Friday10:00–4:00
Saturday open shop10:00–4:00, glue-up at 11
Sunday to WednesdayClosed, building
Emailbench@grainandgroove.example